Bosch vivatmo pro Instructions For Use Manual page 41

QC Configuration
Select Inter val
Daily
Weekly
Bi-Weekly
After x measurements
QC Configuration
Select Controls
Level 0
QC Tester
Find the Administration instructions here:
INFORMATION
www.vivatmo.com/en/for-doctors/downloads/
5. Select the interval to perform the quality control
• by time: select daily, weekly, bi-weekly or
by number of performed measurements: select After x measurements.
•
Select the Arrow Right button.
6. Enter the number of measurements to be performed before next quality control.
7. After selecting the interval, select the Arrow Right button.
Quality control is recommended with both Level 0 and QC Tester reference
controls.
8. Select activation or deactivation of this control methods.
on
9. Select the Arrow Right button to move to the next screen.
on
The QC Configuration screen opens with an overview of the current
QC settings.
10. Check your QC configuration.
11. Confirm with SAVE to save the QC configuration.
Instructions for use © Bosch Healthcare Solutions GmbH
Settings
en
en
en
en
en
en
en
en
en
en
en
en
41