Software setup
When you start your Vivatmo pro basestation for the first time, you will be guided through a setup procedure of 5 simple steps,
which helps you to enter all the required settings.
Region and Language (Basestation‑Software V1.6.0 and higher)
1. Switch on the basestation, by pressing the ON/OFF button.
2. Select a region
The region selection defines the functionality approved for the region.
The Language Screen is displayed.
3. Select a language.
Date and Time
1. Set up date and time. For details, see "2.2 Setting date and time" in Administration instructions.
2. Confirm with DONE after successful setting. The Administrator Account screen opens.
Administrator account
1. Create an administrator account. For details, see "6.1 Add new user" in Administration instructions.
2. Select the CONTINUE button after the successful addition of an administrator. The User accounts screen opens.
You need at least one administrator account to use Vivatmo pro.
Remember this access code carefully. The reset of the administrator account can only be done by
INFORMATION
service personnel.
Instructions for use
© Bosch Healthcare Solutions GmbH
Installation
en
en
en
en
en
en
en
en
en
en
en
en
19