Viessmann Vitocell 140-E Installation And Service Instructions Manual page 16

Installation sequence
Cylinder without fitted Solar-Divicon
Fitting the cover
1.
A
2.
Fig. 10
A Viessmann logo
Installing the air vent valve on the solar side
2.
1.
Fig. 11
1. Push the corrugated hose into the elbow.
2. Screw the air vent plug into the elbow.
3. Push the corrugated hose into the solar flow and
secure the elbow with flat gasket to the cylinder.
Route the drip hose of the air vent valve into a ves-
sel.
16
(cont.)
3.
Continue on page 28.