Viessmann Vitocell 140-E Installation And Service Instructions Manual page 15

Cylinder without fitted Solar-Divicon
1.
Fig. 9 Shown: Vitocell 100-E, type SEIC, 600 l
Type plate
A
1. Fit the front section of the Vitotrans thermal insula-
tion.
2. Push the cylinder thermal insulation towards the
front by patting it. This reduces the gap between
the Vitotrans and the cylinder.
(cont.)
4.
3.
A
2.
3. Fit the rear cover strip to the thermal insulation.
4. Affix type plate
Installation sequence
.
A
15