Spa Cover And Locking System Installation - Cal Spas ESCAPE Owner's Manual

5.3 Spa Cover and Locking System Installation

5.3 Spa Cover and Locking System Installation
Important! Keep the spa covered when not in use!
• Covered spas will use less electricity in maintaining your set temperature .
• Covering your spa will protect you spa's finish from the sun's ultraviolet rays.
• You are required to keep the spa covered to maintain warranty coverage.
• Covering your spa helps prevent children from drowning in your spa.
In addition, while the spa cover is rigid, it is not designed to support any weight. Therefore, as a safety
precaution and to preserve the life of your cover, you must not sit, stand, or lie on it, nor should you place
objects of any kind on top of it.
Step 1. Step 1.
Place cover on spa. Make sure it is correctly positioned.
Step 2. Step 2.
Position the tie-down hardware (attached to the straps of your cover) on the side of the spa so they
are easily reached by the cover tie-down straps.
Step 3. Step 3.
With the straps pulled taut (but not overly tight), lightly drill the location for screw placement. Gently
drill 3 holes - one for each screw slot in the lock. (If you do not have a low torque drill, use the lowest
torque setting on the drill you have.) DO NOT drill all the way in but instead just make a guide for
starters.
71