Using Fm Traffic; Led Blink Codes - Garmin Nuvi 850 Owner's Manual

Using FM Traffic

The traffic receiver is included in some
nüvi packages.
Use an FM TMC (Traffic Message
Channel) traffic receiver to receive
traffic information that is broadcast
over the FM Radio Data System. For
information about FM traffic receivers
and coverage areas, see
.com/traffic.
nOTe: Garmin is not responsible for
the accuracy of the traffic information.
The FM traffic receiver receives
signals from the traffic service
provider and displays that information
on your nüvi.
nOTe: The FM traffic receiver and
the nüvi must be in data range of an
FM station transmitting TMC data to
receive traffic information.
nüvi 800 Series Owner's Manual
www.garmin
To power outlet
in vehicle
Power
Status
LED
LED
nOTe: If your FM TMC traffic
receiver has an antenna with suction
cups on it, route the antenna on your
windshield vertically using the suction
cups.

LED Blink Codes

The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
• Yellow dot-dash flashes—
determining which country you are
currently in.
• Yellow solid—searching for signal.
• red solid—momentary sync loss.
• Green solid—normal traffic data.
Using FM Traffic
To power connector
on nüvi cradle