Adjusting Backup Camera Settings - Garmin Nuvi 850 Owner's Manual

Customizing the nüvi
nOTe: You do not need to activate
the subscription included with your
FM traffic receiver (if it came with
one). The subscription activates
automatically after your nüvi acquires
satellite signals while receiving traffic
signals from the service provider.
1. From the Menu page, touch
Settings > Traffic.
2. For Non-North American units, touch
Subscriptions
American units, touch Add.
3. Write down the FM traffic receiver
unit ID.
4. Go to www.garmin.com/fmtraffic
purchase a subscription and get a
25-character code.
5. Touch Next on the nüvi, enter the
code, and touch Done.
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM traffic receivers, you must
obtain a new code for each receiver.
0
Tools
> Add. For North
to
Adjusting Backup
Camera Settings
The nüvi supports NTSC and PAL
composite video input. Touch
Settings > Backup
Switch to Camera—select how the nüvi
>
switches to the backup camera when
your vehicle is in reverse.
• auto—automatically switches to
backup camera mode when the nüvi
detects that your vehicle is in reverse.
• Prompt—prompts you to switch
to backup camera mode. When the
prompt appears, touch
the backup camera.
• never—select to not show the
backup camera. This option requires
you to select
Backup Camera page to view the
backup camera.
Video Format—select a video input.
Select Auto for the nüvi to automatically
Tools
Camera.
Yes
View Camera
nüvi 800 Series Owner's Manual
>
to view
on the