Assemble Back Plate & Mount Frame - Ferris Simplicity FAST-Vac Operator's Manual

Assemble Back Plate & Mount Frame
1. Attach the back plate (A, Figure 23) to the mount
frame (B) using carriage bolts, flat washers, and
nuts. Use two 5/16-18 x 3/4" carriage bolts (D) in
the top two holes, and two 5/16-18 x 1-1/4" carriage
bolts (E) in the bottom holes.
2. Install the cover latch (H, Figure 23) and reinforce-
ment plate (G). Secure with two 5/16-18 x 3/4" bolts
(F), and 5/16-18 serrated flange nuts (J).
3. Mount the back plate to the support assembly and
secure with the long hitch pin (K, Figure 23) and hair
pin clip (L).
00
3-Bag Hood & Mount Installation
A
C
H
J
Figure 23. Install Back Plate
A. Back Plate
B. Mount Frame
C. 5/16-18 Nylon Lock Nuts
D. 5/16-18 x 3/4 Carriage Bolts
E. 5/16-18 x 1-1/4 Carriage Bolts
F. 5/16-18 x 1 Bolts
G. Latch Reinforcement Plate
H. Cover Latch
I. 5/16" Flat Washers
J. 5/16-18 Serrated Flange Nuts
K. Hitch Pin
L. Hair Pin Clip
15
E
B
I
L
K
D
E
F
G