Universal Electronics URC2068BC2 User Manual page 9

Pulse Pairing Options
RF PAIRING
This remote control is capable of
controlling a set-top box(STB) that is
hidden from sight when it has been paired
with an RF STB or an RF Adapter.
Tip: The STB or RF Adapter that you are
using must be compatible with this remote
control and the proper pairing method must
be used. For the latest list of compatible RF
devices, go to www.urcsupport.com/rf
RF Pairing to Set-Top Box
NOTE: Certain set-top boxes (such as
EVOLUTION branded boxes) may require the
user to put the box into RF PAIRING mode
before RF pairing can occur. To do so, locate
REMOTE CONTROL in the on-screen MENU
and select REMOTE CONTROL PAIRING
before following the steps shown below.
1. Press and hold the SETUP key on the
remote until the LED blinks twice.
2. Press the MENU key on the remote and
the remote will begin blinking as it
attempts to pair.
3. If a PIN number appears on your
TV screen, enter that number using the
remote numeric keys.
4. LED on the remote will blink twice to
verify success.
RF Pairing to an RF Adapter
To perform RF pairing with an RF adapter, please
refer to the instructions provided with the adapter
or go to www.urcsupport.com/rf and locate the
support page for the RF adapter for more information.