Installing The Cf Card - Mopar Navus Owner's Manual

Installing the CF Card

The Navus comes with a preprogrammed Compact Flash (CF) data
card. The CF card is located on the passenger's side of the unit,
behind a door. When removing the CF card, avoid pinching the card
in the middle; instead, grab the card by the top and bottom edges.
To remove the preprogrammed CF card:
1. Gently pull the CF Door toward you to open it.
2. Push the eject button to the left of the CF card. Continue to push
the eject button until the CF card ejects.
3. Gently slide the card out of the unit.
To insert the preprogrammed CF card:
1. Face the top of the CF card (which contains the holes) to the front
of the Navus.
2. Slide the CF card into the card slot. Continue pushing the CF
card into the slot until the eject button extends out to the end of
the CF card. Do not apply excessive force.
3. Close the CF card door.
A
CF Door
Front
of your
Navus
Eject Button
> I CF C
PPENDIX NSTALLING THE
Compact Flash (CF) Card Slot
ARD
61