Planning And Modifying Routes; Planning A Route - Mopar Navus Owner's Manual

P M
LANNING AND ODIFYING
P
LANNING AND
The quickest way to navigate to a place using your Navus is to find
your destination using the FIND key and route to it. But if you want
to plan trips where your starting location is not your current physical
location, use the Route feature. Once you plan, create, and save the
route, you can retrieve it when you need it and you will not have to
stop and ask for directions.
The Route Menu lists many options for creating routes. To access the
menu, press and hold the MENU/ROUTE key on your Navus for
two seconds. You can also press MENU, then select Route.
32
R > P R
OUTES LANNING A OUTE
M R
ODIFYING OUTES

Planning a Route

Planning routes is fast and easy once you become familiar with and
understand the various steps and options.
To plan a new route:
1. Press and hold the MENU key. A Route Menu page appears.
2. From the Route Menu page, select New. A Start Point window
appears.
3. From the Start Point window, select one of the three options:
Current Location, Use Map, or Find. Then select the start point.
4. Once you select an option, the Start Point window disappears
and an End Point window appears. Repeat the previous step.
5. The End Point window disappears and a Route Preference
window appears. Select one of the three options.
A route calculation icon appears in the lower left corner
of the Map page as the unit calculates the route. A voice
prompt sounds and a blue route line appears. The unit is
now ready to navigate the new route.