Resetting Map Setup Default Settings - Mopar Navus Owner's Manual

C Y N
USTOMIZING OUR AVUS
The Line, Point City, and Area Tabs contain two common settings:
Text Size and Max Zoom:
Text Size: Specifies how large or small the names of items on
your Map page appear. If you do not want the name of an item to
appear on the Map page, select Off in the Text Size field.
Max Zoom: Specifies the maximum map scale at which a map
item displays. If Auto is selected, the maximum map scale is
determined by the Map Detail setting on the Map tab (see page
43) to prevent the map from becoming too cluttered. If Off is
selected, the item does not display.
Some map data is only visible at certain zoom scale ranges. For
example, you may set Street Label (from the Line tab) to a Max
Zoom of 200 miles, but the street names would not show above a 0.8
mile zoom scale. Setting the Max Zoom to Auto generally gives the
best display performance.
44
> C M P
USTOMIZING THE AP AGE

Resetting Map Setup Default Settings

You may reset (restore) map settings for each individual setup tab, or
you can reset map settings for all five tabs at once.
To reset the map setup default settings:
1. While on the Map Setup page, select the tab (Map, Line, Point,
etc.) you wish to restore to the original settings.
2. Press the MENU key. A reset menu appears.
3. To restore the settings for the
current tab selection, select
Reset Settings.
To restore the settings for all
tabs on the Map Setup page,
select Reset All Settings.