Mopar Navus Owner's Manual page 45

A map of the avoided road
appears with a default name (the
street names). You can change
this name by touching it and
entering a new name using the
on-screen keyboard.
To avoid an area:
1. Press and hold the MENU key for two seconds to view the Active
Route menu. Select Routing Setup. The Routing tab opens.
2. Select Avoidance. The Avoidance page appears.
3. Select Custom Avoids. The Avoid List page opens. To add an
avoidance, select Add Avoid.
4. Select Avoid Area to select a rectangular area to avoid on your
routes. A Map page appears, enabling you to mark a "start point."
5. Touch the first corner of the area you want to avoid and touch
the check mark in the right corner. A blue push pin marks the
start point.
P M
LANNING AND ODIFYING
6. Touch the second corner of
the area you want to avoid.
A gray box covers the area
you have selected. Touch the
check mark to accept the
area.
A map of the avoided road
appears with a default name
(Area 000). You can change this
name by touching it and entering
a new name using the on-screen
keyboard.
Once entered, your Navus avoids
these roads/areas unless no other
roads are available. The Navus
will avoid these area until you
remove them from the Avoid List
or uncheck them.
R > M R
OUTES ODIFYING A OUTE
39