Using The Touchscreen; Adjusting The Speaker Volume - Mopar Navus Owner's Manual

Using the Touchscreen

The touchscreen on the Navus allows you to make menu selections,
position the map pointer, scroll through menu selections, and enter
data with the touch of your finger.
To use the touchscreen, touch the desired object on the screen with
your finger, applying just enough pressure to activate the function. It
is not necessary to apply excessive pressure to the touchscreen.
If you sense that the touchscreen is not responding properly, it may
need to be calibrated.
To calibrate the touchscreen:
1. Press the unit's MENU key. Select Options.
2. Touch the Display tab.
3. Press the unit's FIND key to begin calibration. Follow the on-
screen instructions.

Adjusting the Speaker Volume

To adjust the speaker volume:
1. Press and hold the SPEAK/VOLUME
key. A speaker volume adjustment page
appears.
2. Adjust the speaker volume by moving
the slider up or down with your finger (on
the touchscreen). The loudest setting is
ten; the softest setting is one. Pushing
the slider all the way down turns off the speaker. (Alternatively,
volume can be cycled between three settings by repeatedly
pressing the SPEAK/VOLUME key from this screen. The three
settings are volume off, user setting, and maximum volume.)
3. When finished, touch the X on the touchscreen.
G S > N B
ETTING TARTED AVUS ASICS
Slider
7