Garmin Montana 650 Owner's Manual page 53

Installing a microSD Card
Memory cards can be used for
additional storage. Also, some maps
are available preloaded on memory
cards. Go to http://buy.garmin.com
more information.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Remove the batteries or battery.
3. Slide the card holder
the top edge of the device and lift
up, as instructed in the battery
compartment.
➊
Montana 600 Series Owner's Manual
toward
➊
➋
4. Place the microSD card
device with the gold contacts facing
down.
5. Close the card holder.
for
6. Slide the card holder toward the
bottom of the device to lock it.
7. Replace the batteries
8. Replace the battery cover, and turn
the D-ring clockwise.
Connecting the Device to a
Computer
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
The lithium-ion battery pack will
charge while connected to the
computer.
Device Information
in the
➋
(page 2).
notice
49