Operating Mode For Heat Pump Units 30Xwhpze; Cooling Mode; Heating Mode - Carrier AquaForce PUREtec 30XWHPZE 301 Installation, Operation And Maintenance Instructions
Water-cooled liquid chillers and heat pump with r-1234ze(e) or optionally with r-515b refrigerant
Hide thumbs
Also See for AquaForce PUREtec 30XWHPZE 301:
Table of Contents
Advertisement
8 - OPERATING MODE FOR HEAT PUMP UNITS 30XWHPZE
8.1 - Cooling mode
The unit controls on the cooling setpoint.
8.2 - Heating mode
Unlike in the cooling mode, the unit uses the heating setpoint in this configuration. The evaporator leaving water control (lowest setpoint
taken into consideration) is still maintained to prevent operation at very low temperatures.
22
Advertisement
Table of Contents
