TaoTronics TT-BH101 User Manual page 5

EN EN
Using Your Headset via Bluetooth®
1. Make sure the headset and your Bluetooth® device are close to each other
(within 3 feet / 1 meter).
2. When the headset is off, press and hold the MFB button for 5s to bring
the headset into pairing mode with the headset indicator flashing red and white
alternately.
3. Enable Bluetooth® on your device and search for nearby Bluetooth® devices.
4. Find "TaoTronics T10" in the search results. Tap on the name to connect. Once
connected, the indicator will flash white every 5 seconds.
5S
• When you need to pair with a second device, double press the MFB
button with the headset indicator flashing red and white alternately.
• If the device Bluetooth® is disabled or out of range, the headset will
enter pairing mode automatically. No pairing after 10 minutes will
turn off the headset.
05 EN Wireless Headset
TaoTronics T10
ABC-XXX
Headset Button Operations
Function Operation
Press and hold the MFB button
Voice Assistant
for 2 seconds.
Answer Calls Press the MFB button once.
Press and hold the MFB button
Reject Calls
for 1 second.
Press and hold the MFB button
End Calls
for 1 second.
Press the Mute Button once.
Mute Calls
Press again to unmute.
Volume + / - Press the Volume + / - Button
Pause / Play Press the MFB button.
EN
Wireless Headset EN 06