KNOWING YOUR HEADSET USING YOUR HEADSET Charging We highly recommend that you fully charge the headset before using for the first time. Microphone Mute Button Charge Headset with Dongle 1. Place the headset into the Dongle. 2. Connect the Dongle to any USB charging port with the included cable. Charge Headset with USB-C Connect the headset to any USB charging port with the included cable.
Power ON/OFF Using Your Headset via Dongle 1. Place the headset in the Dongle, then connect the Dongle to any USB port of PC or laptop with the included cable. The Dongle can be used for charging now, but its Bluetooth® function will not be enabled. 2.
Page 5
3. Enable Bluetooth® on your device and search for nearby Bluetooth® devices. Press and hold the MFB button 4. Find “TaoTronics T10” in the search results. Tap on the name to connect. Once Voice Assistant for 2 seconds. connected, the indicator will flash white every 5 seconds.
Auto Re-connect CLEANING AND MAINTENANCE 1. Take off the headset from the Dongle or power off the headset. 2. Press and hold the MFB button for 3s. 3. The headset will connect to last paired devices automatically. Up to 2 devices can be connected at the same time. Restore to Factory Settings Clean the earbuds DO NOT clean...
TROUBLESHOOTING Cannot Turn On the Dongle. • Make sure the Dongle is connected to any USB ports of your computer/laptop and the ports works properly. • Make sure the Dongle is connected with the included USB-C cable. Cannot Find the Headset in the Bluetooth List. •...
IMPORTANT SAFETY INSTRUCTIONS Please read the instructions thoroughly before using this The Bluetooth® word mark and logos are registered trademarks owned product and retain it for future reference. by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc.
We can only provide after-sales service for products that are sold by TaoTroincs or TaoTroincs authorized retailers and distributors. If you have purchased your unit from a different place, please contact your TT-BH101 seller for return and warranty issues. * Please have your invoice and order ID ready before contacting support@taotronics.com...