Table of Contents
Advertisement
EN
Power ON/OFF
ON
Power on & Pair:
Hold the MFB button for 5s
when it is off.
Power on & Re-connect:
Hold the MFB button for 3s
when it is off.
Bluetooth® Caution
• Place the two devices to be connected close to each other and turn off
other Bluetooth® devices.
• The maximum effective Bluetooth® range may vary with the environ
mental circumstances. Obstacles (walls, fences, etc.) between the two
devices may shorten the effective range.
03 EN
Wireless Headset
OR
OFF
• Hold the MFB button for
3s when it is on.
• Place the headset in the
charging cradle.
Using Your Headset via Dongle
1. Place the headset in the Dongle, then connect the Dongle to any USB port of PC
or laptop with the included cable. The Dongle can be used for charging now, but
its Bluetooth® function will not be enabled.
2. Take out the headset and hold the MFB button for 3s to power on, it will connect
to the Dongle automatically. If the connection fails, double press the pairing
button to connect. The Dongle indicator will be solid white if the connection is
successful.
2
• Using the included high-speed transmission cable for connection can
improve the quality and clarity of your calls.
• If the headset and Dongle are connected, hold the pairing button for 3s
to disable the Bluetooth® function of the Dongle.
• If the headset is out of range, the Dongle will enter link-loss mode but
can be re-paired if the headset is in range again in 10 minutes.
EN
1
Wireless Headset
EN
04
Advertisement
Table of Contents
