Polaris 340 LX 2007 Service Manual page 215

Steering and Suspension Systems
EDGE 136 Rail Assembly
RAIL TIP
A
SLIDER FASTENER
A = 3 - 6 Ft.Lbs.
B = 35 Ft.Lbs.
C = 19 Ft.Lbs.
Assembly Notes
• Never re-use Nylock nuts fasteners with locking
agent. Always replace with new parts.
• All pivots must rotate freely after tightening
fasteners.
• Apply Polaris Premium All Season Grease to all
grease zerks as outlined in the maintenance table.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners when mounting
the suspension to the tunnel.
8.20
FRONT-REAR SCISSOR STOP
CARRIER WHEEL
C
C
SLIDER
= T
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
C
SPRING GUIDE
WHEEL MOUNT
CARRIER WHEEL
REAR-REAR SCISSOR STOP
A
IDLER ADJUSTMENT BOLT
A