Steering and Suspension Systems
REAR SUSPENSION ASSEMBLY ILLUSTRATIONS
EDGE 121 Pivots / Rear Idler
B
GREASE ZERK
A = 45 Ft.Lbs.
B = 35 Ft.Lbs.
C = 36 Ft.Lbs.
Assembly Notes
• Never re-use Nylock nuts fasteners with locking
agent. Always replace with new parts.
• All pivots must rotate freely after tightening
fasteners.
8.16
SHOCK PIVOT
B
B
SHAFT
= T
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
WASHER
GREASE ZERK
REAR PIVOT SHAFT
H BRACKET
SPACER
A
• Apply Polaris Premium All Season Grease to all
grease zerks as outlined in the maintenance table.
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners when mounting
©2011 Polaris Sales Inc.
SPACER
SHAFT
A
B
CAUTION
the suspension to the tunnel.
IDLER SHAFT
C - Both
Sides