340 Fan Engine; Blower Housing Assembly - Polaris 340 LX 2007 Service Manual

340 FAN ENGINE

Blower Housing Assembly

CYLINDER COVER
FRICTION PLATE
FRICTION SPRING
RETURN SPRING
Disassembly / Assembly Process
1. Clamp recoil rope with a pliers. Remove recoil handle
from rope. Tie knot in end of rope and remove pliers.
2. Remove recoil / fan housing.
3. Remove cylinder cover. (Carburetor intake boots and
exhaust manifold removal required to remove cylinder
side covers). Discard used intake and exhaust
gaskets.
4. Lock recoil hub with a large screwdriver. Remove
recoil hub fasteners.
5. Reference RECOIL PULLEY section for recoil
disassembly / assembly information.
INTAKE GASKET
RATCHET
RECOIL HUB
9923396 - 2007-2012 EDGE/Widetrak LX Service Manual
©2011 Polaris Sales Inc.
CYLINDER COVER
CYLINDER COVER
RECOIL PULLEY
RECOIL SPRING
6. Assembly is the reverse of disassembly.
Fastener Torque
Recoil Hub 9 ft.lbs. (12 Nm)
Friction Plate /
5 ft.lbs. (7 Nm)
Recoil Pulley
Recoil / Fan
Housings
Engine Systems
RECOIL / FAN HOUSING
Note
Secure fasteners
after all covers are
in place and
snapped together.
5.17
5