Installing And Removing Memory Modules - eMachines emonster Series User Manual

.........................................................................................................................................
6. Secure the end of the card to the computer with retaining screw.
7. Connect any cables that should be attached to the card.
8. Replace the system cover according to the instructions in "Replacing the Cover" in Chapter 5.

Installing and Removing Memory Modules

You can increase the amount of memory in your computer up to 256MB.
Each DIMM socket supports the following memory features:
Unbuffered 168-pin 3.3 V DIMMs with gold-plated contacts
SDRAM
Single or double-sided DIMMs in the following sizes:
DIMM size
16MB
32MB
64MB
128MB
......................................................................................................................................................................................................................................
Non-ECC memory
2 Mbit * 64bit
4 Mbit * 64bit
8 Mbit * 64bit
16 Mbit * 64bit
Installing and Removing Board Options and Drives
6-3