eMachines emonster Series User Manual page 19

5 AC Power Receptacle
Your system power cable plugs into the AC power receptacle.
6 Voltage Selection Switch
The voltage selection switch must be set to match the AC power voltage.
CAUTION
Setting the voltage selection switch incorrectly will damage your computer. Verify that this
switch is set correctly for your AC power voltage before turning on your computer.
7 Ethernet Card (optional)
You can use the Ethernet network by using this card.
NOTE
For more information, refer to the Ethernet Card Quick Start Guide (PDF format) that came
with your system.
8 Option Card Slot Covers
9 Parallel Port (LPT1) Connector
You can connect a parallel device, such as a printer, to the parallel port.
10 Air Ventilation Holes
There are holes for air ventilation.
......................................................................................................................................................................................................................................
1-8
Introduction
.........................................................................................................................................
5
6
7
10
9
8