Editing Your Route - Garmin GPSMAP 276C Owner's Manual

B O A
ASIC PERATION IN UTOMOTIVE

Editing Your Route

When you are navigating a route, you can edit that route. You can
add areas and roads to avoid as well as temporary detours to your
current route. You can also add stops along your trip, called Via
Points.
While navigating, press NAV to open the Navigate menu.
Entering Custom Avoids
Custom avoids allows you to enter specific areas and roads that you
want to avoid in your navigation. Custom avoids apply to all routes,
but detours apply to only the active route. You can add custom
avoids while you are navigating a route or before you navigate.
To enter a custom avoid:
1. Press NAV while navigating to a destination in Automotive
Mode.
Or
Open the Map Page, and press MENU.
2. Select Custom Avoids, and press ENTER.
3. Press ENTER when the Add Avoid button is highlighted.
4. Select Avoid Road or Avoid Area, and press ENTER.
5. Use the ROCKER to move the arrow to the first point in the
avoidance area. Press ENTER to select the first point.
58
M > E Y R
ODE DITING OUR OUTE
6. Move the arrow to the end point, and press ENTER. During
route calculation and navigation, the GPSMAP 276C avoids
the area within the box or the selected area of the road.
The selected roads are avoided.
7. When finished, highlight the OK button, and press ENTER.
Creating a Detour
If there is road construction or some other form of a detour while
navigating a route, you can have your GPSMAP 276C create a
detour route for you.
To create a detour:
1. While navigating a course, press NAV.
2. Select Detour from the Navigate menu.
3. Select a distance, and press ENTER. The GPSMAP 276C
will recalculate your course based on your detour distance.
GPSMAP 276C Owner's Manual