Vertical Navigation - Garmin GPS 95AVD Owner's Manual

To perform a trip and fuel plan for a route...
· Highlight the "SPD:" field and enter the planned speed, followed by
ENT.
· Highlight the "Flow:" field and enter the estimated fuel flow followed by
ENT.
· The GPS 95 will now display the calculated figures.
NOTE: When "all" is selected, no desired track (DTK) will be shown since
this value only applies to an individual leg.
8.17 VERTICAL NAVIGATION PLANNING
8-18
· Highlight the first cyclic field (top left)
and select "RTE" with CLR.
· Highlight the next cyclic field and
select the desired route number by
pressing CLR.
· Highlight the "Leg>" field and select
the desired leg, or select "All" for the
entire route, using CLR.