Using Waypoints By Scanning - Garmin GPS 95AVD Owner's Manual

The waypoint identifier and number of duplicates are displayed on the first
line of the Duplicate Waypoint Page. On the following lines, the waypoint type
and region for each duplicate waypoint is displayed, sorted by distance from
present position. From this list you may select the desired waypoint by
placing the cursor on the desired waypoint, using the arrow keys, and
pressing ENT.

3.10 USING WAYPOINTS BY SCANNING

The GPS 95 offers a waypoint scanning feature which will simplify waypoint
entry. Airports, VORs and NDBs may be scanned by identifier, city or facility
name. Intersections and user waypoints can only be scanned by identifier.
To select a waypoint by scanning identifiers...
· On a blank waypoint identifier field press the WPT key. (If the identifier
field is not blank, press CLR first.) The Scan Page will be displayed
and the cursor will be on a cyclic field.
· Select the desired waypoint category (airport, VOR, NDB, intersection
or user) by pressing CLR (repeatedly).
· Press the right arrow key once to place the cursor on the waypoint
identifier field.
· Enter the starting letter, or letters, of the waypoint identifier. You may
limit the scan to the level that you desire. For example, if you enter "K"
the GPS 95 will scan through all waypoints (for the selected category)
that begin with the letter "K"; but, if you enter "KIA" the GPS 95 will
display only those waypoints that begin with "KIA".
3-14