Goto/Tracback Navigation - Garmin GPS 92 Owner's Manual & Reference

TracBack Navigation
Another method of navigating to a destination is by
using the TracBack function. TracBack allows you to
quickly and easily retrace your path using the track log
automatically stored in the receiver' s memory. The advan-
tage of TracBack is to eliminate the need to mark way-
points along the way and manually create and activate a
route back to where you began your trip.
The TracBack route is created by reducing your cur-
rent track log into a route of up to 30 waypoints, and acti-
vating an inverted route along those points. Once activat-
ed, a TracBack route will lead you back to the oldest track
log point stored in memory, so it' s usually a good idea to
clear the existing track log at the start of your current trip
before you take off.
To clear the track log and define a starting point for a
TracBack route:
1. From the map option page (see page 44), highlight the
'TRACK LOG' option. Press
setup page.
2. Use the up arrow key to highlight the 'CLEAR LOG?'
option.
E
3. Press . The clear log confirmation page will
appear. Use the left arrow key to highlight the 'Yes?'
prompt and press
To activate a TracBack route:
1. From the map option page, highlight the 'TRACK LOG'
E
option. Press
2. Highlight the 'TRACBACK?' option and press
Once TracBack has been activated, the unit will take
the track log currently stored in memory and divide it
into segments called "legs". Up to 30 temporary way-
points (e.g., 'T001') will be created to mark the most sig-
nificant features of the track log in order to duplicate your
original path as closely as possible. A TracBack route from
your present position to the oldest track log point will be
created as the active route (the active route page will
appear), and provide steering guidance to each waypoint
back to the starting point of your track log.
E
to access the track
E
.
to access the track setup page.
E
.
Reference
TracBack
Navigation
To define the starting point
for TracBack navigation,
clear the track log at the
beginning of each trip.
To begin navigation of a
TracBack route, highlight
the 'TRACBACK?' prompt
and press ENTER.
31