Garmin GPS 92 Owner's Manual & Reference page 60

Reference
Setup Menu:
Date/Time
& Timers
To reset the timer, highlight
the 'Timer:' field and press
the LEFT ARROW key.
Setting the count down
timer.
54
Date/Time and Timer Options
The date and time are calculated from satellites and
cannot be edited. Because the time shown is UTC (GMT
or 'zulu') time, you will need to enter a time offset to dis-
play the correct local time for your area.
To enter the time offset:
1. Highlight the 'LOCAL OFFSET' field.
2. Enter the time offset for your longitude and press
Remember to select a positive or negative indicator for
your offset. (You'll have to move the field highlight to the
left of the offset to enter a positive or negative sign for
the offset. A negative sign is used for North America.)
E
3. Press to confirm the offset.
The GPS 92' s timer function will count down from an
entered interval and alert you with a message, or use it as
an elapsed timer that will count up to 99:59:59.
To set the countdown timer:
1. Highlight the 'Timer' field and press
2. Select the 'Down' setting and press
will advance to the time field.
3. Enter the countdown time (hours, minutes and seconds).
E
4. Press to confirm and begin the countdown.
When the timer expires (at 00:00:00), you will be
informed with a "Timer has expired" message.
The timer will also automatically transition to the
count up mode and display how much time has elapsed
since the timer expired. The count up timer will keep a
running clock until it is manually reset.
To reset the count up timer:
1. With the 'Timer' field in the count 'Up' setting, highlight
the timer field and press
2. Press the left arrow key to clear the field. Press
finish and restart the timer.
E
.
E
. The highlight
E
.
E
.
E
to