Waypoint; Waypoint Definition Page; Reference Waypoints - Garmin GPS 12XL Owner's Manual & Reference

REFERENCE

Waypoint

Definition &
Reference
Waypoints
The GPS 12XL' s advanced
waypoint planning fea-
tures allow you to create
new waypoints and prac-
tice navigation without
ever setting foot outside.
If you create a new way-
point by entering coordi-
nates from a map, you
may want to re-mark the
waypoint's exact position
once you get there.
To re-define an existing
waypoint's position coor-
dinates from the waypoint
definition page, simply
highlight the DST field
and press ENTER. Use the
LEFT arrow key to set the
distance to 0.00, and press
ENTER to confirm.
The old coordinates will be
replaced by the coord i-
nates of your present posi-
t i o n (you must have a
valid 2D or 3D position
fix and the reference way-
point name field must be
blank).
20

Waypoint Definition Page

Waypoint
Name
Reference
Waypoint
(leave blank for
present position)
Bearing from
Reference
Waypoint
The waypoint definition page lets you create new
waypoints manually or review and edit an existing way-
point's coordinates, symbols, and comments. It is also
used to delete an individual waypoint from memory
(see pg. 22). To create a new waypoint manually, you'll
need to know its position coordinates or its approxi-
mate distance and bearing from an existing waypoint.
To create a waypoint by entering coordinates:
1. From the waypoint definition page, highlight 'NEW?',
and press
2. Enter a waypoint name, and press
3. Press
selection, and press
4. Highlight the 'DONE?' prompt, and press
return to the waypoint page.
5. Highlight the position field, enter your position using
the arrow keys, and press
6. Press

Reference Waypoints

To create a new waypoint manually without know-
ing its position coordinates, you'll need to enter its
bearing and distance from an existing waypoint or your
present position.
To create a new waypoint by referencing a stored
waypoint:
1. From the waypoint definition page, highlight 'NEW?',
and press
2. Enter a waypoint name, and press
Function Prompts
.
to select a waypoint symbol, make your
.
.
to confirm the 'DONE?' prompt.
.
Position
Coordinates
Waypoint Comment
Distance from
Reference
Waypoint
.
to
.