Acquire Satellite Signals; Configure Your Device - Garmin Forerunner 410 Quick Start Manual

Charging
clip
The length of time a fully charged
battery will last depends upon usage.
A fully charged battery can run
the device with GPS on for up to 8
hours. See the owner's manual for
more information.

Configure Your Device

The first time you use your device,
follow the on-screen instructions
to learn how to use the bezel, set
your user profile, and configure the
device.
The device uses your user profile to
calculate calorie consumption.

If you are using an ANT+ heart
rate monitor, select
configuration to allow the heart
rate monitor to pair (connect) with
your device. See
information.

acquire Satellite Signals

To set the correct time of day and
begin using the device, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe: To turn off the GPS receiver
and use the device indoors, touch and
hold GPS. Select
noTe: You cannot acquire satellites
in power save mode. To exit power
save mode, press
Forerunner 410 Quick Start Manual
Yes
during the
page 7 for more
off for GPS.
enter or quit.