Step 4: Acquire Satellite Signals - Garmin Forerunner 40 Quick Reference Manual

noTe: The Garmin logo
should be right-side up.
4. Press quit or
save mode.
5. Bring the Forerunner within range
(3 m) of the heart rate monitor.
The heart rate icon appears
on the training mode pages.
Step 4: Acquire
Satellite Signals
To set the correct time of day and
begin using the Forerunner, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe: To turn off the
GPS receiver and use the
Forerunner indoors, touch and
hold gPS. Select
Forerunner 405 Quick Reference Guide
enter to exit power
off for gPS.
noTe: You cannot acquire
satellites in power save mode.
To exit power save mode,
press enter
1. Go outdoors to an open area. For
the best reception, make sure
the antenna of the Forerunner is
oriented toward the sky.
2. Touch and hold
training mode.
3. Stand still and do not begin
moving until the locating satellites
page disappears.
When you are receiving satellite
signals, the GPS icon appears in
the training mode pages.
or quit.
Antenna
location
training to enter