Mark Waypoint Page - Garmin eTrex eTrex Owner's Manual

Reference
Mark Waypoint
Page
The 'EDIT LOCATION'
Page displays on-screen
instructions on how
to edit the waypoint
location.
The 'ENTER CORRECT
ELEVATION' Page
allows you to change
the elevation for the
waypoint.
22
To change the location (position coordinates):
1. Press the PAGE Button and switch to the 'MENU'
Page. Press the UP or DOWN Button and highlight
'MARK'. Press ENTER. The 'MARK WAYPOINT'
Page appears.
2. Press the UP or DOWN Button and highlight the
'POSIITON COORDINATES' fi eld and press ENTER.
The 'EDIT LOCATION' Page appears.
3. Scroll through the latitude and longitude position
places using the UP and DOWN Button (UP Button
to move right to left, DOWN Button to move left
to right. When you reach the position place you
want to change, stop and press ENTER. Using the
UP or DOWN Button, scroll through the choices
and highlight the one you want. Press ENTER. The
position place is now changed.
4. Press the UP or DOWN Button to highlight the 'OK'
fi eld and press ENTER. The 'MARK WAYPOINT'
Page appears.
5. Press the UP or DOWN Button to highlight the 'OK'
fi eld and press ENTER. Your location with the new
position coordinates now stored in memory.
To change the elevation:
1. Press the PAGE Button and switch to the 'MENU'
Page. Press the UP or DOWN Button and highlight
'MARK'. Press ENTER. The 'MARK WAYPOINT'
Page appears.
2. Press the UP or DOWN Button and highlight
the 'ELEV' fi eld and press ENTER. The 'ENTER
CORRECT ELEVATION' Page appears.
3. Use the UP or DOWN Button to highlight the
desired digit and press ENTER. A selection window
appears. Press the UP or DOWN Button to select
a new number and press ENTER. Repeat until all
numbers are changed.
4. Press the UP or DOWN Button to highlight the 'OK'
fi eld and press ENTER. The 'MARK WAYPOINT'
Page appears with the correct elevation displayed.