Advertisement
Quick Links
DIP Switch
Low-cost DIP Switch with Slide Pins
Allows automatic mounting with DIP IC insertion
machines.
Washable models with seal tape are available.
SMT (surface-mounted terminal) models are
available.
Ordering Information
Flat actuated
No. of
poles
l
Standard
DIP terminal
1
A6T-1101
2
A6T-2101
3
---
4
A6T-4101
5
---
6
A6T-6101
7
---
8
A6T-8101
9
---
10
A6T-0101
Raised actuator
With seal tape
DIP terminal
DIP terminal
A6T-1102
A6T-1104
A6T-2102
A6T-2104
---
---
A6T-4102
A6T-4104
---
---
A6T-6102
A6T-6104
---
---
A6T-8102
A6T-8104
---
---
A6T-0102
A6T-0104
Flat actuated
Standard
With seal tape
SMT terminal
SMT terminal
---
---
A6S-2101
A6S-2102
A6S-3101
A6S-3102
A6S-4101
A6S-4102
A6S-5101
A6S-5102
A6S-6101
A6S-6102
A6S-7101
A6S-7102
A6S-8101
A6S-8102
A6S-9101
A6S-9102
A6S-0101
A6S-0102
A6T/A6S
Raised actuator
SMT terminal
---
A6S-2104
A6S-3104
A6S-4104
A6S-5105
A6S-6104
A6S-7104
A6S-8104
A6S-9104
A6S-0104
1
Advertisement
Related Manuals for Omron A6T Series
Summary of Contents for Omron A6T Series
- Page 1 DIP Switch A6T/A6S Low-cost DIP Switch with Slide Pins Allows automatic mounting with DIP IC insertion machines. Washable models with seal tape are available. SMT (surface-mounted terminal) models are available. Ordering Information Flat actuated Flat actuated No. of Raised actuator Raised actuator poles Standard...
-
Page 2: Specifications
A6T/A6S A6T/A6S Specifications Ratings/Characteristics Switching capacity 25 mA at 24 VDC Insulation resistance 100 MΩ min. (at 250 VDC) Contact resistance 200 mΩ max. (initial value) Dielectric strength 500 VAC for 1 min between terminals of same polarity, and between terminals of different polarity Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance... -
Page 3: Installation
A6T/A6S A6T/A6S Flat Actuated with SMT Terminal Standard/With Seal Tape A6S- 101 A6S- 102 Flat Actuated Raised Actuator Standard With Seal Tape Seal tape (t = 0.06) Raised Actuator PCB Dimensions No. of Model with SMT Terminal (Top View) poles A6S- 104 A6S-2101 A6S-2102... - Page 4 A6T/A6S A6T/A6S Soldering Washing Observe the following conditions when soldering the DIP Switch. Washable A6T (with seal tape), A6S (with seal tape) Automatic Soldering Bath Not washable A6T (standard/raised actuator), Soldering temperature: 260 C max. A6S (standard/raised actuator) Soldering time: 5 s max.
- Page 5 To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A102-E1-1 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Control Components Division H.Q. 28th Fl., Crystal Tower Bldg.