Page 1
DIP Switch A6T/A6S Low-cost DIP Switch with Slide Pins Allows automatic mounting with DIP IC insertion machines. Washable models with seal tape are available. SMT (surface-mounted terminal) models are available. Ordering Information Flat actuated Flat actuated No. of Raised actuator Raised actuator poles Standard...
A6T/A6S A6T/A6S Specifications Ratings/Characteristics Switching capacity 25 mA at 24 VDC Insulation resistance 100 MΩ min. (at 250 VDC) Contact resistance 200 mΩ max. (initial value) Dielectric strength 500 VAC for 1 min between terminals of same polarity, and between terminals of different polarity Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance...
A6T/A6S A6T/A6S Flat Actuated with SMT Terminal Standard/With Seal Tape A6S- 101 A6S- 102 Flat Actuated Raised Actuator Standard With Seal Tape Seal tape (t = 0.06) Raised Actuator PCB Dimensions No. of Model with SMT Terminal (Top View) poles A6S- 104 A6S-2101 A6S-2102...
Page 4
A6T/A6S A6T/A6S Soldering Washing Observe the following conditions when soldering the DIP Switch. Washable A6T (with seal tape), A6S (with seal tape) Automatic Soldering Bath Not washable A6T (standard/raised actuator), Soldering temperature: 260 C max. A6S (standard/raised actuator) Soldering time: 5 s max.
Page 5
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A102-E1-1 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Control Components Division H.Q. 28th Fl., Crystal Tower Bldg.
This manual is also suitable for:
A6s seriesA6t-1101A6t-1102A6t-1104A6t-2101A6t-2102...
Show all