TP-Link VIGI Quick Start Manual page 2

2
Use Your Camera with an NVR
The camera works with an NVR for easier batch access and management.
*Here we use a VIGI NVR as an example.
Network Camera
Network Camera
Step 1. Connect the Hardware
Connect your cameras to the same network as your NVR
(as shown above).
Step 2. Power On the Cameras
Power on your cameras with the PoE power supply or an
external power supply.
Note: The camera's standard power supply is 12V DC or PoE (802.3af/at).
The power source should meet LPS, PS2, and other requirements according
to IEC 62368-1.
Using your cameras with other NVR brands:
Step 1: Power on your cameras and connect them to the network.
Step 2: Activate the cameras using the VIGI Security Manager or TP-Link VIGI app (refer to the next section).
Step 3: Refer to the NVR's User Manual to add cameras.
More Management Methods
You can also access and manage your cameras via any of the methods below.
View live video and modify camera settings on your computer.
1. Download the VIGI Security Manager on your computer at
https://www.tp-link.com/support/download/vigi-security-manager/.
2. Install the VIGI Security Manager and open it.
3. Cameras on the same network as your computer can be automatically
discovered. Go to Settings > Discovered Devices, click + Add to
activate your discovered cameras by setting passwords, and follow
the instructions to add your cameras.
Q1: What can I do if no cameras are discovered?
• Refresh to discover your camera again.
• Make sure the camera is powered on.
• Make sure your camera and NVR/computer are in the same subnet. If
not, use the VIGI Security Manager to set camera's network
parameters.
• Try to add your camera manually.
• For other NVR brands, make sure you have activated the camera by
setting a password via the VIGI Security Manager or TP-Link VIGI app.
• Do not use any other chargers than those recommended.
• Do not use damaged charger or USB cable to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from water, fire, humidity or hot environments.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of
directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/
Network Device
(e.g., Switch or Router)
VIGI NVR
Step 3. Add Cameras with the NVR
Before you start, make sure your NVR is working properly.
1. Right click on the Live View screen, and click Add Camera.
2. Select your camera and click
If you have disabled Plug and Play on your NVR, create a
password or use a preset password for your camera.
Note: If you can't find your camera, refer to FAQ-Q1.
Done! You can now view live video and manage cameras.
Remotely view live video, manage cameras, and get instant alerts.
1. Download and install the TP-Link VIGI app.
or
2. Open the TP-Link VIGI app and log in with your TP-Link ID. If you don't
have an account, sign up first.
3. Tap the + button on the top right and follow the app instructions to
activate and add your cameras.
Q2: How do I know the camera is powered on?
• The IR LED will turn on for 20 seconds once the camera is powered on. If
it's off, you can cover the lens for several seconds and check if the IR LED
turns on.
• Check the Ethernet port LED status of the network device your camera is
connected to.
For more questions, please refer to
https://www.tp-link.com/support/faq/2850/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety)
Regulations 2016.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
If you have any suggestions or needs for the product guides, you are welcome
techwriter@tp-link.com.cn
to email
For technical support, replacement services, user guides, and more information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
Monitor
to add your camera directly.
+