Daikin FTXS-L Series Engineering Data page 60

EDUS091128
Preparation before Installation
Attachment methods of metal plate electrical wiring cover
Refrigerant Piping Work
1.
Flaring the pipe end
WARNING
Split Type Air Conditioners FTXS-L / FDXS-L Series
Tab (1)
Tab
(Cut exactly at
right angles.)
Set exactly at the position shown below.
A
Die
Tab (1)
Tab (2)
CAUTION
Check
The pipe end must
Flare's inner surface
perfect circle.
Make sure that the
Remove burrs.
Flaring
Flare tool for R410A
Clutch-type Clutch-type (Rigid-type) Wing-nut type (Imperial-type)
A 0-0.020 inch (0-0.5mm) 0.039-0.059 inch (1.0-1.5mm) 0.059-0.079 inch (1.5-2.0mm)
Installation Manual
59