Capresso 454 Operating Instructions Manual page 9

b. Push the "prog" button (G10).
The saucer blinks. The display
will read "AM 12:00" and shows
the number "10" in bold.
c. Push and hold the"h"-button
(G8) to program the hour at
which you would like to make
coffee later. Push and hold the
"m"-button (G9) to program
the minutes at which you would
like to make coffee later. Now
the time to make coffee later is
programmed.
d. Push and hold the "2-10" button
(G11) until the desired number is
displayed in bold. Release this
button. Then push and hold the
"strength" button (G12) until the
saucer sits under the desired
cup. Release this button.
Note: Within 5 seconds the dis-
play will return to the current
mode and the current grinder
settings. To check if you are in
the programming mode or in the
current mode just look at the
saucer. If the saucer is not blink-
ing you are in the current mode.
If the saucer is blinking you are
in the programming mode.
e. If you wish to check the pro-
grammed settings, push the
"prog" button (G10). The display
will show you the future time
and the future grinder settings.
Note: The settings for the grinder
can be different in the program
mode and in the regular (current)
mode.
Note: If you want your coffee
ready at 7:00 AM, set the timer to
6:45 AM.
See chapter 9, page 16 for
"Grinding and Brewing Coffee
Later".
9