Regency Kee Post MTBP27 Instructions page 2

·
MTBP27 Kee Post Table Legs INSTRUCTIONS
You will need 2 person(s) for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
STEP 1 (Round Table Top): Place Table Top(C) on a clean flat surface with
desired table finish face down. Using a tape measure, position assembled legs
at an equal distance from one another as shown in Figure B. Then, attach the
assembled Legs to Table Top using 6 Screws(A) per Leg.
EQUAL
C
Figure B
EQUAL
STEP 1 (Rectangle Table Top): Place Table Top(C) on a clean flat surface with desired table finish face
down. Position assembled legs as shown in Figure C. Then, attach assembled Legs to Table Top using 6
Screws(A) per Leg.
C
Figure C
STEP 2: Using 2 people, flip the table over and adjust leveling glides accordingly.
Any problems or questions call Regency Office Furniture at 1-866-816-9822