Steps
Place the display back-cover and antenna assembly on a flat surface and perform the post-requisites to install the display
back-cover and antenna assembly.
Next steps
1. Install the
display
cable.
2. Install the camera.
3. Install the
display
panel.
4. Install the
display
hinges.
5. Install the
display
bezel.
6. Install the
display hinge
7. Install the
display
assembly.
8. Install the
wireless
card.
9. Install the
base
cover.
10. Install the
secure digital
11. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
secure digital
3. Remove the
base
cover.
4. Remove the
memory
module.
5. Remove the
M.2 2230 solid-state drive
NOTE:
This procedure applies only to systems shipped with a M.2 solid-state drive installed.
82
Removing and installing components
caps.
card.
After working inside your
Before working inside your
card.
or the
M.2 2280 solid-state
computer.
computer.
drive, whichever applicable.