The cursor does not correctly follow the
pen movements
Cause
Pen incorrectly calibrated
The Tablet PC does not start after switch on
TheTabletPC
Cause
The battery is dead.
The power adapter is not connected correctly.
The Tablet PC stops working
Energysaving mode
TheTabletPC
Cause
The Tablet PC is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.
Fujitsu
Fault elimination
► Calibrate the pen as described in chapters
"Setting the pen", Page 27
the pen", Page
27.
Troubleshooting
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
► Check whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
Troubleshooting and tips
and
"Calibrating
71