Removing The M.2 2230 Solid-State Drive - Dell OptiPlex 7090 Ultra Service Manual

Removing the M.2 2230 solid-state drive

For systems with solid-state drive in the hard drive bay will not support hard drive.
Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the device from fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the (M2x3) screw that secures the solid-state drive cover to the chassis.
2. Turn the solid-state drive cover and remove it from the chassis to access the M.2 2230 solid-state drive.
3. Remove the (M2x3.5) screw that secures the M.2 2230 solid-state drive to the chassis.
4. Lift and remove the M.2 2230 solid-state drive from the solid-state drive slot on the daughter board.
98 Removing and installing components