Table of Contents
Advertisement
Steps
1. Place the power button into the slot on the chassis.
2. Replace the (M2x3) screw to secure the power button to the chassis.
3. Route the power button cable through the routing guides on the chassis.
4. Connect the power-button cable to the connector on the system board.
Next steps
1. Install the
system
fan.
2. Install the cover.
3. Install the device on
Fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
4. Follow the procedure in
after working on your
device.
118
Removing and installing components
Advertisement
Table of Contents
