Table of Contents
Advertisement
Steps
1. Align the screws on the heat-sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system
board.
Next steps
1. Install the
system
board.
2. Install the
solid-state drive
3. Install the
memory
module.
4. Install the
WLAN
card.
5. Install the
system
fan.
6. Install the cover.
7. Install the
hard-drive
assembly.
NOTE:
For systems configured with solid-state drive in the hard-drive bay
● Install the
daughter
● Install the
M.2 2280 solid-state drive in hard-drive bay/M.2 2230 solid-state drive in hard-drive
8. Install the device on
Fixed stand/Pro 1 height-adjustable stand/Offset VESA mount/Pro 2 height-adjustable stand/Wall
mount.
9. Follow the procedure in
126
Removing and installing components
board.
after working on your
device.
bay.
Advertisement
Table of Contents
