Braun CareStyle 5 Manual page 10

Steam comes out from the
closure.
Ironing system is ready,
but no steam emission from
the iron.
The LED is still on although
water has been refi lled.
Subject to change without notice.
Please do not dispose the product in the household waste at the end of its useful life. Disposal can
take place at a Braun Service Centre or at appropriate collection points provided in your country.
10
The closure is not tightened
correctly.
The closure gasket is damaged.
End of water alarm has been
reset without water refi ll.
The reset button has not
been pressed or has not been
pressed correctly.
Turn off the appliance and tighten the
closure correctly, but not overtighten it.
Note: the closure might be hot.
Turn off the appliance immediately and
contact an authorised Braun Customer
Service.
Refi ll the water tank and press the
steam button several times for 1 minute
until pump loads water inside the
system.
Turn off the appliance and wait until it
has cooled down.
Make sure the reset button is pressed
correctly.