Charcoal Filter - GE RVM1535DM User Manual

Helpful Information
The Exhaust Feature

Charcoal Filter

(on some models)
The charcoal filter
cannot be cleaned. It
must be replaced. Order
Part No. WB02X11124
from your GE supplier.
To Remove
Charcoal Filter
Remove 3 grille screws
at the top of the oven.
To Install
Charcoal Filter
34
If the model is not vented
to the outside, the air will
be recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
To remove the charcoal
filter, disconnect power at
the main fuse or circuit
breaker panel or pull
the plug.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
The charcoal filter
should be replaced when
it is noticeably dirty or
discolored (usually after
6–12 months, depending
on hood usage). See
"Optional Kits," page 9,
for more information.
Remove the front grille by
backing out the 3 screws
along the top. Slide the
grille to the left, then pull
straight out. Slide the filter
toward the front of the
oven and remove it.
Insert the filter into the
top opening of the oven
as shown. It will rest at an
angle on 2 side support
tabs and in front of the
right rear tab. Replace
the grille and 3 screws.