Table of Contents
Advertisement
4. This box also appears during normal system operation if the video cable becomes
disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your
video controller and computer, because your monitor is functioning properly.
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with your
computer and video card.
To Run the Built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Select OSD items of Self-Diagnostics in Others feature.
3. Press the joystick button to start the diagnostics. A gray screen is displayed.
4. Observe if the screen has any defects or abnormalities.
5. Toggle the joystick once again until a red screen is displayed.
6. Observe if the screen has any defects or abnormalities.
7. Repeat steps 5 and 6 until the screen displays green, blue, black, and white
colors. Note any abnormalities or defects.
The test is complete when a text screen is displayed. To exit, toggle the joystick control
again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool,
the monitor is functioning properly. Check the video card and computer.
UltraSharp 30 Monitor
Brightness/Contrast
Display Info
Input Source
DDC/CI
Color
LCD Conditioning
Display
Firmware
PIP/PBP
Service Tag
USB
Self-Diagnostics
Menu
Reset Others
Personalize
Factory Reset
Others
Select
On
Off
M3T101
CN073K0
Select
®
ENERGY STAR
Exit
Troubleshooting
|
83
Advertisement
Table of Contents
