Table of Contents
Advertisement
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the
Safety
instructions.
To connect your monitor to the computer:
1. Turn off your computer.
2. Connect the DisplayPort or USB cable, and the USB-C cable from your monitor
to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: U3023E default setting is DisplayPort 1.4. A DisplayPort 1.1 Graphic
card may not display normally. Please refer to
No image when using DP connection to the PC
Connecting the HDMI Cable (optional)
36
|
Setting up the monitor
product specific problems –
to change default setting.
Advertisement
Table of Contents
