Setting Up The Monitor; Connecting The Stand - Dell UltraSharp 30 User Manual

Setting up the monitor

Connecting the stand

NOTE: The stand riser and stand base are detached when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand shipped
with your monitor. If you are connecting a stand that you purchased from
any other source, follow the set up instructions that are included with the
stand.
To attach the monitor stand:
1. Open the front flap of the box to get the stand riser and stand base.
2. Align and place the stand riser on the stand base.
3. Open the screw handle at the bottom of the stand base and turn it clockwise to
secure the stand assembly.
30 | Setting up the monitor