Using The Tilt, Swivel, And Vertical Extension; Tilt, Swivel And Vertical Extension; Rotating The Display - Dell UltraSharp 30 User Manual

Usb-c hub monitor
Hide thumbs Also See for UltraSharp 30:
Table of Contents

Advertisement

Using the tilt, swivel, and vertical extension

NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.

Tilt, swivel and vertical extension

With the stand attached to the monitor, you can tilt the monitor for the most
comfortable viewing angle.
NOTE: The stand is detached when the monitor is shipped from the
factory.

Rotating the display

Before you rotate the display, extend the display vertically until the top of the stand
riser and then tilt the display backwards until the maximum to avoid hitting the bottom
edge of the display.
1
30°
90°
150 mm
30°
21°
90°
Setting up the monitor
|
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

U3023eUltrasharp 30 u3023e

Table of Contents